A full book
of steel.
Raw materials from the Americas — iron ore, coal, scrap and more — and semi-finished, long and flat steel from partner mills in Asia. One catalogue, both directions of the trade.
The inputs
behind the melt.
Iron ore, scrap, coke and coal, HBI, DRI and pig iron, ferroalloys, electrodes and lithium products — sourced across North, Central and South America for steelmakers in Asia, against the chemistry and physical specification your operation requires.
08 linesIron ore
Grades, chemistry and sizing confirmed against your specification.
RM-02Steel scrap
Ferrous grades, sizing and packing confirmed against your specification.
RM-03Coke, steam coal & anthracite
Quality parameters and packing confirmed against your specification.
RM-04HBI, DRI & pig iron
Chemistry, sizing and packing confirmed against your specification.
RM-05Ferroalloys
Alloy type, chemistry and packing confirmed against your specification.
RM-06Electrodes
Diameter, grade and packing confirmed against your specification.
RM-07Lithium hydroxide
Grade, packaging and documentation confirmed against your specification.
RM-08Lithium carbonate
Grade, packaging and documentation confirmed against your specification.
RM / CUSTOMNeed another grade?
The beginning
of the roll.
Billets and slabs for re-rolling, forging and downstream production. Cast to the chemistry and dimensions your mill or processing line is set up to receive.
02 linesStrength
in length.
Rebar, wire rod, sections, pipe and wire products for construction, infrastructure, fabrication and industrial consumption. Cut lengths, coil weights and tolerances confirmed against the order.
20 linesReinforcing bars
- Size
- #3 to #18
- Length
- up to 60 ft
Rebar in Coils
- Size
- #3 to #18
- Length
- in coils
Wire Rods
- Size
- 5.5 to 12.7 mm
- Length
- in coils
Pipes
- Size
- 12 mm to 457 mm
- Length
- up to 60 ft
HR Angles
- Sizes
- 1 to 8 inches
- Length
- up to 60 ft
Channels
- Size
- up to 18 inches
- Length
- up to 60 ft
Beams
- Size
- up to 36 inches
- Length
- up to 60 ft
Round bars
- Size
- 6–80 mm
- Length
- 5,500–12,000 mm
Square bars
- Size
- 6–80 mm
- Length
- 5,500–12,000 mm
Flat bars
- Width
- 10–160 mm
- Thickness
- 2.8–40 mm
- Length
- 5,500–12,000 mm
Galvanized wire
- Size
- 1–6 mm
Bright wire
- Size
- 0.8–8 mm
Black annealed wire
- Size
- 0.8–8 mm
Aluzinc wire
- Size
- 1–6 mm
Spring wire
- Size
- 1.4–4 mm
Copper coated wire
- Size
- 0.8–4 mm
Seamless hot-deformed pipe
- Size
- 21.3–168.3 mm
- Thickness
- 2.6–25 mm
Hexagon bars
- Size
- 12–80 mm
- Length
- 5,500–12,000 mm
T-bars
- Depth
- 24–50 mm
- Width
- 24–50 mm
- Length
- 5,500–12,000 mm
Cold deformed wire B500C
- Size
- 5–12 mm
Not in the index?
Surface, form
and finish.
Hot-rolled, cold-rolled, coated and pre-painted flat products for manufacturing, construction and appliance applications. Coil, sheet or plate — with coating weights and surface quality agreed up front.
11 linesHot rolled coil (HRC)
- Thickness
- 1.2–25.4 mm
- Width
- 914–2,134 mm
Cold rolled coil (CRC)
- Thickness
- 0.25–3.43 mm
- Width
- 965–2,032 mm
Hot rolled plate
- Thickness
- 4.8–152.4 mm
- Width
- 1,524–4,267 mm
Hot rolled sheet
- Thickness
- 1.2–25.4 mm
- Width
- 914–2,134 mm
Cold rolled sheet
- Thickness
- 0.25–3.43 mm
- Width
- 965–2,032 mm
Hot dip galvanized coil (HDGI)
- Thickness
- 0.25–4.06 mm
- Width
- 914–2,032 mm
Hot dip galvanized sheet
- Thickness
- 0.25–4.06 mm
- Width
- 914–2,032 mm
Aluzinc coated coil
- Thickness
- 0.22–0.76 mm
- Width
- 610–1,930 mm
Aluzinc coated sheet
- Thickness
- 0.22–0.76 mm
- Width
- 610–1,930 mm
Prepainted galvanized coil (PPGI)
- Thickness
- 0.25–1.93 mm
- Width
- 914–1,829 mm
Prepainted galvanized sheet
- Thickness
- 0.25–1.93 mm
- Width
- 914–1,829 mm
Looking for another finish?
Not every grade
is on the page.
All dimensions are shown in millimetres. Availability, grades, coating weights and tolerances vary by origin and mill. If your requirement is not listed, send the specification — we will confirm what can be sourced and at what terms.
Send a specification